Contact Us Join Our Team

How to Recycle Old Office Routers and Switches Responsibly

Old routers, network switches, wireless access points and related cabling can accumulate quickly in an office storeroom. When equipment is replaced during a technology upgrade, it may look like ordinary scrap, but it can contain recoverable metals, plastics and electronic components. It may also retain configuration files, passwords, network maps and other information that should never leave the business uncontrolled.

Responsible disposal combines data protection, reuse, compliant e-waste handling and clear internal records. For Australian businesses, the correct path depends on the device, its condition, the state or territory, and the policies of the selected recycler. A little preparation can prevent data exposure, reduce landfill and sometimes recover value from equipment that still has a useful life.

Disposal route Best for Main benefit Important check
Internal redeployment Working, supported equipment Extends service life Confirm security updates and compatibility
Donation or refurbishment Usable older devices Supports reuse and reduces waste Remove business data and document transfer
Certified e-waste recycler Damaged, obsolete or surplus gear Recovers materials safely Request data destruction and recycling records
Manufacturer or supplier take-back Branded equipment with an available programme May simplify logistics Check eligibility and freight conditions
General rubbish or kerbside bin Not suitable for networking equipment Convenient but unsafe Avoid this route; electronics should not go to landfill

Why network equipment needs careful handling

A router or switch is more than a box with cables attached. Managed switches may store VLAN settings, port assignments, administrator usernames, firewall rules and logs. Business routers can contain Wi-Fi credentials, VPN profiles, static IP addresses and details about cloud services. Even if a device has been powered down for months, its memory may still hold sensitive information.

Some older units also contain batteries, power supplies and circuit boards that should be processed through an approved electronic waste stream. Putting them in a general rubbish bin can send valuable materials to landfill and create avoidable environmental risks. In Australia, electronic waste rules and collection options vary between councils, so a local transfer station or “tip” may accept some devices but refuse others.

The National Television and Computer Recycling Scheme is focused on televisions and computers rather than every category of office electronics. Businesses should therefore avoid assuming that a scheme covering monitors or desktop computers automatically covers routers and switches. Ask the council, transfer station or commercial recycler specifically about networking equipment before loading a vehicle.

Prepare every device before collection

Start with an asset register. Record the manufacturer, model, serial number, purchase date, location, condition and intended destination. Include accessories such as power adapters, rack ears and mounting brackets. This helps distinguish equipment being reused from equipment being recycled and provides an audit trail for finance, IT and sustainability reporting.

Next, identify whether the unit is still connected to any service. Cancel or transfer broadband accounts, cloud management subscriptions, support contracts, software licences and leased hardware arrangements. A returned leased router may have different requirements from a company-owned switch. Keep copies of invoices, return authorisations and courier tracking details where relevant.

Before handing equipment over, follow the manufacturer’s approved factory-reset or secure-erasure procedure. Delete configuration backups from management platforms, remove certificates and keys, and revoke administrator access. Resetting a device is useful, but it should not be treated as a universal guarantee of secure data removal. If a unit contains persistent storage, ask a specialist to confirm whether it has been sanitised, physically destroyed or processed under a documented standard.

Choose reuse before material recovery

The most sustainable option is usually to keep a working device in use, provided it remains secure and technically suitable. A small switch may be useful in a training room, workshop or community organisation. An older access point may support a non-critical guest network, although it should not be used where the manufacturer no longer provides security updates.

Reuse must not become an excuse to pass on vulnerable technology. Check firmware support, encryption capability, power consumption and compatibility with current standards. Equipment that cannot receive security patches, uses obsolete wireless protocols or has a known vulnerability may create a bigger risk for its next owner. Clearly label donated items with their model and limitations, while keeping confidential configuration information separate.

Refurbishment is another practical route. A specialist may test ports, replace fans or power supplies, grade the equipment and resell it with suitable documentation. This can be worthwhile for enterprise hardware with modular components, but less so for low-cost consumer routers that are expensive to inspect and transport. Businesses should request evidence that unusable components will be recycled rather than exported without proper controls.

Local conditions matter. In Melbourne and regional Victoria, electrical equipment is affected by the state’s e-waste landfill ban, so businesses should use an approved drop-off or commercial service rather than placing devices in general waste. In Sydney, Brisbane, Perth and smaller regional centres, council services differ considerably, and a commercial collection may be more practical for several racks of equipment. A quick call before collection can save a wasted trip.

Make data security part of the handover

A responsible recycler should explain what happens from pickup to final processing. Ask whether equipment is collected by the recycler’s own staff or a transport partner, how items are tracked, where data-bearing devices are stored, and when erasure or destruction occurs. For a large business, the service should provide certificates, serial-number reports or a destruction register that can be retained with the asset records.

Do not rely on a generic statement that equipment is “environmentally friendly”. Look for a clear chain of custody and evidence that downstream processors meet recognised environmental and workplace standards. The recycler should be able to distinguish repairable devices, reusable parts, ferrous metals, non-ferrous metals, plastics and hazardous residues.

Staff training is just as important as the recycling contractor. A switch left beside a loading dock or placed in an unmarked cage can be removed before the official collection. Set a rule that all retired technology goes through one nominated process, with sign-off from IT or an authorised manager. Organisations that value trained, accountable customer service can look to examples such as the NSC career team when considering how people and process support reliable technology operations.

Create a repeatable office process

A written end-of-life procedure makes responsible disposal easier during a busy office move or hardware refresh. It should cover approval, asset tagging, data sanitisation, software de-registration, physical storage, transport, recycling documentation and record retention. Assigning one owner prevents the common situation where IT assumes facilities is handling the waste while facilities assumes a supplier is collecting it.

Keep a secure holding area for retired equipment. It should be dry, access-controlled and protected from damage, especially if devices are waiting for a quarterly collection. Pack switches and routers so that sharp rack brackets, loose cables and heavy units do not injure staff or damage other equipment. Separate batteries, damaged power supplies and equipment affected by water or fire, and tell the recycler about those hazards in advance.

For businesses with offices across Australia, use a central standard but verify local arrangements at each site. A council depot in regional New South Wales may accept a different range of items from a recycling facility in Adelaide or Canberra. Record the recycler’s ABN, service scope, insurance details and certificates, then review the arrangement annually. This is especially useful when a company is preparing for an audit, sustainability report or office relocation.

The process can also support purchasing decisions. Track how many devices are repaired, reused, resold, recycled or sent for material recovery. Compare energy use and support life when selecting replacement hardware, not just the purchase price. Choosing equipment with longer firmware support, modular parts and a manufacturer take-back option can reduce future e-waste and simplify the next refresh.

Retiring network equipment responsibly protects business information, keeps useful technology in circulation and ensures electronic components are handled through the right recovery channel. For an Australian office, the safest approach is straightforward: catalogue the equipment, erase or destroy stored data, check local acceptance rules, use a reputable recycler and retain proof of what happened.

NSC supports organisations with practical ICT solutions and technology guidance. Contact a qualified local provider to review your current stock of routers, switches, access points and related hardware, then establish a secure collection and recycling process that fits your sites, systems and compliance needs.