Contact Us Join Our Team

How to troubleshoot a phone that overheats during video calls

A phone that becomes warm during a video call is usually working harder than it does during ordinary messaging or web browsing. The camera, microphone, display, processor, wireless connection and video app may all be active at the same time. When several of these systems run continuously, heat can build up around the battery and internal components.

A little warmth is common, particularly during a long call or while the phone is charging. However, a device that becomes too hot to hold, displays a temperature warning, shuts down, drains unusually quickly or smells unusual needs immediate attention. Continuing to use it can affect performance and may create a safety risk if the battery is damaged.

The Australian climate can make the problem more noticeable. A video call in a sunny Melbourne room, a parked car in Brisbane or an airless home office in Western Sydney places extra thermal pressure on the phone. The steps below can help identify the cause and restore safer, steadier video calling.

Check the phone’s environment first

Move the phone away from direct sunlight and remove it from enclosed spaces such as a car dashboard, a pocket or a thick bag. Cases made from dense rubber or layered protective materials can trap heat, so take the case off temporarily while testing. Place the device on a hard, cool surface where air can circulate around it.

Do not put an overheated phone in a refrigerator or freezer. Sudden temperature changes can create condensation inside the device and cause further damage. Instead, stop the call, disconnect the charger and let the phone cool naturally for 15 to 30 minutes. Avoid using ice packs, fans aimed at a wet device or other methods that could introduce moisture.

Charging during a video call is a frequent source of excess heat. The battery is receiving energy while the processor, screen and wireless radios are consuming it. If the battery level is adequate, unplug the phone before calling. If charging is necessary, use a reputable charger and cable that match the manufacturer’s specifications, rather than an unverified low-cost accessory.

Reduce the workload from video and apps

Lower the screen brightness and enable an automatic brightness setting. A bright display can contribute significantly to heat, especially during a long Teams, Zoom, FaceTime, WhatsApp or Google Meet session. If the app supports it, switch off background blur, virtual effects or high-definition video unless they are genuinely needed.

Close demanding apps running in the background, including games, navigation, photo editors and streaming services. Restarting the phone can clear a stuck process that is using the processor continuously. After restarting, open only the calling app and check whether the temperature remains normal.

Update the operating system and video-calling app through the official app store. Updates often resolve battery drain, camera problems and inefficient background activity. At the same time, remove apps that you no longer use and review which ones are permitted to access the camera, microphone and location. On both Android and iPhone, battery settings can reveal whether a particular app has used an unusual amount of power.

If the phone is warm during calls but cool during other tasks, test a voice-only call. This separates camera and video processing from general network or battery issues. A wired headset can also reduce the need to hold the phone close to your face and may allow the screen to be dimmed or locked when video is no longer necessary.

Improve the mobile or Wi-Fi connection

Weak reception can make a phone work harder. When a device struggles to maintain a 4G, 5G or Wi-Fi connection, it repeatedly communicates with the network and may increase power consumption. Try moving closer to the Wi-Fi router, switching from mobile data to a stable Wi-Fi network, or changing location to an area with better reception.

In Australia, reception can vary sharply between city buildings, suburban homes and regional areas. A call made in a concrete office in Sydney, a regional property near Wagga Wagga or a crowded shopping centre may behave differently from one made outdoors. Telstra, Optus and Vodafone coverage also varies by location, so a network issue should not automatically be treated as a phone fault.

Restart the router if every device is experiencing poor call quality, and pause large downloads or cloud backups during an important meeting. If only the phone is affected, reset its network settings after recording saved Wi-Fi passwords. This can clear incorrect network configurations, although it will remove stored connections and paired network details.

Privacy tools can affect connection performance as well. A VPN may add processing and routing overhead, particularly when the phone is already using mobile data or a distant server. Review this VPN privacy guide before changing settings, then briefly test the call with the VPN disconnected if your security policy permits it.

Check the battery, charger and software health

An ageing battery may heat up more easily because its ability to deliver and accept power has declined. Signs include rapid percentage drops, unexpected shutdowns, a phone that warms during simple tasks and a battery that appears swollen. On an iPhone, Battery Health can show maximum capacity and peak performance information. Many Android models provide similar information under battery or device-care settings.

Stop using the phone if the back cover or screen is lifting, the battery is visibly swollen, there is a chemical smell or the device becomes dangerously hot when idle. Do not puncture, press or remove a built-in battery yourself. Keep a damaged device away from flammable materials and arrange assessment through the manufacturer, an authorised repair provider or an appropriate e-waste service.

Use the original charger where possible, or select a certified replacement from a reliable retailer. Poor-quality adapters may deliver unstable power and can increase heat. The same principle applies to wireless charging pads: remove thick cases, keep the phone correctly aligned and avoid using wireless charging for long video meetings.

A factory reset should be a last resort, not the first response. Back up photos, contacts and authentication details before considering it. If overheating started after a particular app or system update, record the timing and error messages. That information helps a technician identify whether the problem is software-related, battery-related or connected to a particular component.

Know when professional help is needed

A phone that cools after reducing brightness, improving reception and removing the charger may simply have been under heavy load. It should still be monitored over the next few calls. Keep note of the app being used, call duration, charging status, room temperature and whether the device was on Wi-Fi or mobile data.

Professional support is appropriate when overheating happens during short calls, continues while the phone is idle or returns after a restart. Seek help promptly if the phone shuts down repeatedly, the camera stops working, the battery drains unusually fast or the device shows a temperature warning. Continued use can turn a repairable fault into damage to the screen, battery or main board.

Australian consumers may have rights under the Australian Consumer Law when a phone is not of acceptable quality, does not match its description or fails to last for a reasonable period. Keep the purchase receipt, repair records and details of the symptoms. A retailer or manufacturer may need this information when assessing a warranty or consumer guarantee claim.

Avoid taking the phone apart or using an unauthorised replacement battery. A qualified technician can inspect the charging port, battery, thermal sensors, camera module and system logs safely. For business users, especially those handling customer information or government work, professional servicing also helps protect data and maintain secure device settings.

When a phone overheats during video calls, begin with the simple checks: stop charging, move it into a cool shaded place, remove the case, close demanding apps and improve the network connection. These steps solve many temporary problems without risking personal data or the device itself.

For repeated faults, obtain trusted assistance with diagnostics, software updates, battery checks and replacement options. NSC’s certified customer support approach is designed to make device setup, troubleshooting and mobile service decisions clearer. Arrange an assessment before the problem affects an important work meeting, family call or emergency contact.