Contact Us Join Our Team

When Your Phone Shows No Service After an Update

A software update is meant to improve security, fix bugs and add features, but it can occasionally interrupt the connection between your phone and mobile network. The result may be a “No Service”, “SOS only” or “Emergency calls only” message, even when your SIM and account were working normally a few minutes earlier.

The problem can affect iPhones, Samsung Galaxy devices, Google Pixel phones and other Android models. It may involve a temporary network registration fault, an incompatible carrier setting, a damaged SIM, an eSIM profile that needs refreshing or an update that has changed mobile network preferences.

Before assuming the phone needs repair, work through a few safe checks. Some fixes take less than a minute, while others require your carrier or a qualified technician. If you rely on your mobile for work, banking, transport apps or contact with family, use Wi-Fi where available while you investigate.

Check The Simple Connection Settings

Start by switching Airplane Mode on, waiting for about 30 seconds and switching it off again. This forces the phone to search for nearby mobile networks and can restore service after an update. Then restart the device fully rather than simply locking and unlocking the screen.

Look at the signal indicator and try moving outdoors or near a window. Thick concrete walls, underground car parks and large shopping centres can block reception. In regional parts of Australia, including areas outside Toowoomba, Bendigo or Cairns, coverage can change quickly between towns and highways, so a weak signal may be a location issue rather than a software fault.

If your phone has dual-SIM support, open the mobile settings and confirm that the correct line is active. An update may switch off a physical SIM or eSIM, particularly if you use separate numbers for personal and business calls. Check that mobile data, voice calls and roaming are enabled for the line you intend to use.

Inspect The SIM Or ESIM Profile

For a physical SIM, power off the phone before removing the tray. Check that the card is seated correctly and that the gold contacts are clean and undamaged. Reinsert it carefully and restart the device. Avoid wiping the card with liquid or using sharp objects inside the SIM slot.

If possible, test the SIM in another compatible handset. A working SIM in a second phone suggests that the updated device or its network configuration is responsible. A SIM that fails in both devices may need replacement through Telstra, Optus, Vodafone or another provider. SIM cards can also fail after years of use, even if they look normal.

An eSIM needs a different approach. Confirm that its mobile plan remains visible in the phone’s settings and has not been disabled. Do not delete the eSIM profile unless your carrier has provided activation details or a QR code. Removing it can leave you without a simple way to reconnect, especially if the original activation email is no longer available.

Refresh Network Registration

Open the mobile network settings and check the preferred network type. A setting such as 5G Auto is usually suitable, but temporarily selecting 4G or LTE can help identify whether the update has created a 5G registration problem. In Australia, this can be useful in fringe coverage areas where a phone moves between 5G and 4G towers.

Network selection should normally be set to automatic. If the phone is stuck searching, you can briefly turn automatic selection off and allow it to scan for available networks. Select your own carrier only if it appears clearly in the list, then return the setting to automatic after testing. Avoid choosing a different network simply because its name appears.

Check for a separate carrier settings update. On an iPhone, this prompt may appear when opening Settings after a restart. Android phones may receive carrier configuration through system services or the manufacturer’s update process. Your provider’s outage page or app can also show maintenance, tower faults or account restrictions affecting your suburb.

Review APN And Calling Features

The access point name, or APN, controls mobile data. A major operating system update can replace or alter APN details, particularly on unlocked or imported phones. Incorrect values may prevent internet access, although they do not always explain a complete loss of voice and signal service.

Use the APN settings supplied by your carrier rather than copying values from an unrelated website. Some Australian providers use different settings for prepaid, postpaid, wholesale and data-only services. If you edit an entry, save it and restart the phone before testing mobile data again.

Wi-Fi Calling and Voice over LTE can also affect the experience after an update. Turn Wi-Fi Calling off and on again, then check whether VoLTE or 4G Calling is enabled. A phone that depends on older 3G services may have limitations because Australia has been transitioning away from 3G, making current handset compatibility especially important.

Reset Network Settings Safely

If the basic checks do not help, use the phone’s Reset Network Settings option. This does not usually erase photos, apps or documents, but it will remove saved Wi-Fi passwords, Bluetooth pairings, VPN settings and mobile network preferences. Record important Wi-Fi passwords before proceeding.

On many iPhones, the option is under Settings, General, Transfer or Reset iPhone, Reset and Reset Network Settings. Android menu names differ by brand, but the setting is commonly found under System or General Management, Reset and Network Settings Reset. Read the screen carefully so you do not select a full factory reset by mistake.

After the reset, restart the phone and reconnect to Wi-Fi. Test a call, text message and mobile data separately. If calls work but data does not, the issue may be APN or account-related. If the phone still displays “No Service” everywhere, the update may have affected modem software, or the device may have a hardware fault that requires professional assessment.

Know When To Contact Your Carrier

Contact your mobile provider when the account may be suspended, a number transfer is incomplete, a replacement SIM has not activated or the network is experiencing an outage. Have your account details, handset model, phone number and the time the problem began ready. Tell the representative that the issue started immediately after a software update.

Do not rely on the “Emergency calls only” message as proof that emergency calling will always work. In Australia, call Triple Zero on 000 for urgent help, but mobile emergency access can depend on handset compatibility, available networks, local coverage and the status of the device. If your phone cannot connect, use another phone or a landline where possible.

If you are travelling in Japan, roaming settings and partner-network compatibility can add another layer to the problem. A local authorised mobile shop may be able to check the SIM, handset bands and account configuration in person. NSC operates authorised shops for docomo, au, SoftBank and Y!mobile across Fukushima and Miyagi; visitors arranging support can find the Aizu shop before travelling.

Keep the phone connected to Wi-Fi while arranging support, and avoid repeatedly installing unofficial firmware or “signal booster” applications. These can create further compatibility issues and may affect warranty coverage. A certified technician can determine whether the update caused a configuration fault, whether the SIM needs replacing or whether the radio hardware is damaged.

If the phone is used by a business or public service team, repeated connectivity failures may point to a wider device-management or communications issue. NSC also provides ICT solutions covering business systems, mobile POS, IoT, AI and related technologies, which can help organisations review how staff devices and connected services are supported.

When service returns, test calling, SMS, mobile data, voicemail and hotspot functions before leaving Wi-Fi. Install any pending carrier update, keep the operating system current and note the settings that solved the problem. A small record can save time if the same fault appears after a later update.

For persistent “No Service” problems, take the handset and SIM to your carrier or an authorised support shop rather than performing a factory reset immediately. NSC’s certified staff can assist with device setup, contracts, upgrades and troubleshooting, giving you a practical route back to reliable mobile service.