Contact Us Join Our Team

What to do when your phone gets wet

A dropped phone can go from working normally to showing a black screen within minutes. Water may reach the charging port, speakers, microphones, buttons and internal circuit board, while salt, chlorine, sugar and dirt can continue causing corrosion after the outside looks dry.

Whether it happened at Bondi Beach, beside a backyard pool, during a wet Melbourne arvo or in a sudden Queensland storm, the first response matters. Switch off the device, keep electricity away from it and avoid shortcuts that push moisture deeper inside.

Liquid exposure Immediate priority Extra caution
Fresh rain or tap water Turn off and dry the exterior Moisture can remain in ports and speakers
Seawater Switch off and remove salt residue carefully Salt is highly corrosive
Swimming-pool water Switch off and remove chlorine residue Do not assume an IP rating makes it safe
Soft drink, juice or coffee Power down and arrange cleaning Sticky sugars can damage contacts
Muddy or dirty water Avoid pressing buttons and charging Particles may block ports and abrade seals

Act quickly in the first minutes

Take the phone out of the water and remove any case, wallet cover, lanyard or accessory. Hold it with the ports facing down and gently wipe the outside with a clean, absorbent cloth. Do not shake it vigorously, as movement can spread liquid through openings.

Turn the phone off immediately if it is still running. On many iPhones, hold the side button and a volume button until the power-off slider appears. Android instructions vary by manufacturer, but holding the power button, or the power and volume-down buttons, usually brings up the shutdown menu. If the screen is unresponsive, stop pressing buttons rather than repeatedly trying to wake it.

Do not connect a charger, USB cable, headphones or power bank. A wet charging port can create a short circuit, and charging may produce heat while moisture is still inside. If the phone is plugged in, switch off the power at the wall before disconnecting it, rather than pulling a wet cable from the device.

Assess the liquid and the phone

The type of liquid makes a difference. Fresh rainwater is usually less contaminating than seawater, pool water, coffee or soft drink. Salt and minerals can corrode metal contacts, while sugary drinks leave a residue that attracts moisture and interferes with buttons, microphones and speakers.

If a water-resistant phone has been exposed to seawater, chlorinated water or a sticky drink, carefully rinse the exterior with clean tap water only after it is switched off and disconnected from power. This can remove corrosive residue. Do not rinse a phone that has a damaged screen, an open back, a missing seal or an unknown water-resistance rating. With those devices, professional cleaning is safer.

Look for cracks, a lifting screen, a loose back cover, unusual warmth, smoke, a chemical smell or a swollen battery. Move the phone away from flammable materials and do not use it if any of these signs appear. A damaged lithium-ion battery can be hazardous, even when the display still works.

Dry it safely without risky shortcuts

Blot the phone with a lint-free cloth and place it in a dry, well-ventilated spot. Keep the charging port facing down, where gravity can help moisture leave. A fan set to cool or room-temperature airflow can assist, but keep it at a distance and avoid forcing air directly into the port.

Do not use a hairdryer, heat gun, oven, microwave or direct summer sun. Heat can deform seals, loosen adhesive and damage the battery or display. Compressed air can also drive water further inside, particularly through a speaker grille or microphone opening.

Rice is a poor drying method. Small particles and starch dust may enter the charging socket, while the phone can remain damp internally even when buried in a container. If available, place the powered-off device in an airtight container with fresh silica-gel packets, keeping the packets separate from the ports and screen. This is a drying aid, not a substitute for repair.

Wait before switching it on

Leave the phone powered off for at least 24 hours after a small fresh-water incident. Longer exposure, immersion, seawater, pool water and liquid entering through a damaged casing may require 48 hours or professional inspection. The outside can feel dry while moisture remains below the battery, camera module or main board.

When the waiting period has passed, inspect the charging port with a light. Do not insert cotton buds, paper or metal tools. If the phone displays a moisture warning, follow it and continue drying. A wireless charger may avoid the port, but it is not a safe workaround if water has entered the phone itself.

If the phone starts, back up photos, contacts, messages and authentication codes straight away. Water damage can progress gradually, so a working screen does not guarantee that the device is healthy. Avoid demanding tasks such as gaming, video calls or large software updates until important data is secure.

Watch for delayed faults

Common symptoms after liquid exposure include a muffled speaker, unreliable microphone, flickering display, camera fog, random restarts, rapid battery drain and a phone that becomes hot during light use. Charging may stop intermittently, or the device may show a moisture alert even after the port appears clear.

Network trouble can have several causes, so do not assume every “No Service” message is water-related. After the phone has been safely dried and backed up, use the appropriate no-service troubleshooting guidance if the problem began after an update. If signal loss appeared immediately after immersion, arrange an inspection instead of repeatedly restarting the phone.

Australia’s conditions can make delayed damage especially easy to miss. A phone left in a hot car in Adelaide, near humid air in Darwin or in a damp beach bag after a Gold Coast swim may warm up while hidden moisture remains inside. Keep it cool and dry, and remove it from enclosed cases or pockets while it is being checked.

Know when to seek repair

Professional help is the right choice after deep immersion, seawater, pool exposure, a sugary spill or any liquid entering through a cracked screen. It is also sensible when the phone will not switch off, shows battery swelling, smells unusual or develops faults after drying. Technicians can disconnect the battery, inspect corrosion and clean internal components before residue spreads.

Check the manufacturer’s warranty and insurance terms, but do not expect ordinary warranty coverage to include liquid damage. Many phones contain liquid-contact indicators, and water resistance is tested under controlled conditions. An IP67 or IP68 rating does not cover every situation, and seals can weaken after drops, repairs, heat or age.

Avoid taking the phone apart unless you have the correct tools and experience. Opening it can damage waterproof seals, puncture the battery or make a later repair more difficult. In Australia, an authorised service centre or an experienced local repairer can assess whether cleaning, a port replacement, battery work or a full replacement is the most practical option.

For future protection, use a properly fitted case, keep the phone away from the edge of a kayak or esky, and store it in a sealed pouch at the beach or pool. Check that charging cables are dry before use, and never charge the phone overnight if it has recently been exposed to liquid or is showing unusual heat.

Act promptly, keep power away from moisture and prioritise a backup once the device is stable. For people who need dependable help with device setup, troubleshooting or replacement decisions, NSC’s certified customer-support approach offers a useful model: careful assessment first, clear advice second and no unnecessary shortcuts.